Unlock 4G LTE-A Pro B42/43 CAT15 CPE 4X4 MIMO,Antenna Gain 13dBi (4 antenna model),3.5GHz 3400MHZ-3800MHz, Release 12, 4Rx, 2Tx

JATONTEC 8500D is a most advanced LTE CAT15 outdoor data unit specially designed to meet the most challenging demands of today’s high speed wireless backhaul and fixed wireless access deployments by the 4G service operators. The unit can support multiple TDD band operations. Multiple operator network support can also be provisioned on the unit to allow the deployment across entire country with different operators..

JT8500D provides Gigabit PoE connection to connect user terminal device such as indoor router or Wi-Fi AP products. The unit PoE interface can also work with standard PoE switches or router products. The product comes with PoE power adapter and mounting bracket accessories for quick self-installation.

Cost effective & compact design with built-in high gain LTE antenna

Compliant to 3GPP Release 12 standards

2T4R Radio Design

Advanced 4x4 MIMO & CA (2CC & 4CC) support and CAT15 data throughput

Router and bridge operation mode support

IPv4 & IPv6 and Multiple PDN support

PPT, L2TPV3, SNMP and GRE VPN Tunneling clients support

FTP, HTTP and TR-069 management support

48V Gigabit PoE Power

RELIABLE PERFORMANCE

JT8500D is designed to meet the stringent operation environment for outdoor CPE devices. The device can safely operate in a wide temperature ranging from -40 to +55 degree and meets industrial IP67 water and dust proof standard requirements. The device MTBF time is expected to be above 80,000 hours. Depending on the network configuration and DL/UL split ratio configuration, the unit can provide up to 440 Mbps TDD max throughput over the air. The typical coverage should be more than 15km with reasonable good throughput performance.

EASY USAGE & MANAGEMENT

JT8500D is a user-friendly LTE CPE that is easy to install and maintain. The unit is fully integrated and comes with all the necessary device drivers pre-loaded. Subscribers just connect the device to their computer or home switch/router and the device is ready to offer an experience of surfing over Internet. The LEDs on the JT8500D have also been designed for user convenience, and offer a clear sign of what the device is doing. The IP addresses can be dynamically obtained via DHCP.

JT8500D offers rich management features which facilitate the task of carrier. It supports local management access, Telnet, Http, Https and standard TR069 remote OTA management including device configuration, monitoring, and upgrades management.

TECHNICAL FEATURES

JT8500D design is based on the standard implementation of LTE release 11 specification. It is able to meet the most demanding requirements of large service providers with high throughput and availability. JT8500D is a CAT12 CPE and supports advance features such as 4x4 MIMO and Carrier Aggregation, QAM64 and QAM256 modulation on the uplink.

With high gain directional patch antenna, JT8500D enables a longer reception range from the base station. This yields more efficient use of the network with a larger cell reach, guaranteed carrier class service, and customer service probability. Advanced Orthogonal Frequency Division Multiplexing (OFDM) modulation enhances performance in non-line-of-sight (NLOS) conditions to ensure immunity to interference and multi-path conflicts typical of deployments in densely populated urban areas. Moreover, sophisticated QoS capabilities ensure true end-to-end QoS and support high quality data services.

LTE Radio Interface

Radio Access : 3GPP Release 11, Category 15

Operation Mode : 4Rx, 2Tx, DL 4*4 MIMO
             CA : DL 2CA (4x4 MIMO 64 QAM);

                  DL 4CA (2x2 MIMO 256QAM);

                  UL 2CA(64QAM);

     MIMO : DL 2x2 MIMO (4CA);

                  DL 4x4 MIMO(2CA);

                  UL 2x2 MIMO;

Frequency Band : B42/B43

Output Power : 23dBm per Tx

Antenna Gain : 13dBi (4 antenna model)

PHYSICAL & ENVIRONMENTAL

Power DC : 48V/0.5A (Gigabit PoE)

Power Consumption : <15W

Weight :      <2.5Kg

Dimensions :  250mm (L) * 250mm(W) * 75mm(D)

Environment : Operating Temperature, -40℃~55℃.

                          Humidity, 95% max Non-condensing

USER INTERFACE

Data Interface : 1 RJ45 10/100/1000M ETH Port

LED Indicator :  PWR, SYS, NET, SIM, ETH,

                            RF (5 Signal intensity LEDs)

SIM Card :          Single SIM card slot (2FF)

Industry Standards

ITU : 3GPP Release 11

IEEE : IEEE 802.3      10Base Ethernet

            IEEE 802.3u     Fast Ethernet

            IEEE 802.3ab      Gigabit Ethernet

OTHERS : Water Resistance : IP67

                   Safety : CE

CONFIGURATIONS & MANAGEMENT

Network configuration:

DHCP or Static IP address Assignment

Bridge and Router Operation Support

Built-in DHCP Server for LAN Devices

IPv4, IPv6 DS-Lite Support

Multiple PDN interface support

NTP Service Support

SIM card locking feature

Network selection and cell locking provision

Data Networking Features:

VPN Pass-through support (PPTP, L2TPV3 & IPsec)

Built-in L2TP & GRE Tunneling Clients

L2 VPN networking support

Firewall & Access Control

DMZ and Virtual Server Support

IP and Port Filtering Support

Local and Remote Management Restriction

Application Firewall Support

LAN Device Access Control

Device Management

CLI, Telnet, HTTP and HTTPS Interfaces

Standard Based TR-069 Management

FTP and HTTP OTA Firmware Upgrade

USIM and Network PLMN Locking Support

Device Factory Default Setting